Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
Bosch Video Client Live window overview | en 21
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
3.3.2 Video device list pane
Figure 3.4 Video device list pane
The video device list pane shows all configured devices (these devices can be put into groups
in the Configuration Manager):
– Click + to expand a group and see the devices and cameras assigned to it; click - to
collapse the group.
– To see a device in the live video area, double-click it or drag the device to a cameo.
– To see multiple devices in the live video area, select the devices and drag them to the live
video area.
– Right-click a device to open a context menu with the following commands:
–Connect
– Disconnect
–Sequence
– Properties (including name, type and IP address)
3.3.3 Device icons
Each device has an icon related to its type and state.
Dome camera connected
Body camera connected
Body camera not connected
Body camera with video loss
Device icons are shown with an overlay depending on the status of the device:
– Alarm - camera is in alarm mode
– Motion - motion is detected