Operation Guide

42 en | Playback window Bosch Video Client
F.01U.247.166 | v1.2 | 2011.06 Operator’s manual Bosch Security Systems
11.5 Exporting recorded video clips to a PC hard disk
To store recordings from a selected period on a PC hard disk:
1. Drag one or multiple cameras from the left side pane to a cameo.
2. Click export button on playback control panel.
– The export window appears.
3. To change the default location, browse to the location in the PC file system where the
archive file is to be stored.
4. Type a new name for the file to change the file name.
5. Select which cameras to archive in the confirmation window that appears.
– All assigned cameras are included by default.
If the same camera is assigned multiple times in your displayed view, only one entry
for this camera is listed.
6. Enter new values in the From and To boxes to change the selection start and end date/
time.
– The approximate size of the archive file is shown. Ensure that there is sufficient
space to store this file.
7. Click Export to start saving the archive file.
The export is added to the export status list and a progress bar is shown there. The export job
runs in the background, so you can continue using the video client for live viewing, playback,
search or other export tasks.
11.6 Taking snapshots
Use the image capture tab to take a snapshot of a recorded image. Refer to Section 7 Saving
snapshots, page 30.
11.7 Search tabs
The playback window has three search tabs on the right:
–The Event Search tab allows a search for recordings based on alarm and motion events.
Refer to Section 12 Searching for events, page 44.
–The IVA tab allows a search for recordings based on intelligent motion analysis. Refer to
Section 13 IVA search, page 46.
–The Text tab allows a search for recordings based on text. Refer to Section 14 Searching
for text, page 47.