Operation Guide
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Start-up and configuration
- 3 Live window overview
- 4 Viewing live images
- 5 Setting up favorite views
- 6 Live recording
- 7 Saving snapshots
- 8 Instant playback
- 9 Monitor wall
- 10 Controlling cameras
- 11 Playback window
- 12 Searching for events
- 13 IVA search
- 14 Searching for text
- 15 Command line start
Bosch Video Client Searching for text | en 47
Bosch Security Systems Operator’s manual F.01U.247.166 | v1.2 | 2011.06
14 Searching for text
Click the text search tab of the playback window to set up a search filter for text.
Note:
Text search is only supported on DVR 700 cameras with an appropriate licence installed.
14.1 Text search pane
Figure 14.1 Playback window - Text search pane
14.1.1 Setting the search period
Enter the date and time in the From and To boxes to define the period to search:
– The To box shows the time and date of the latest (newest) recording and the From box
the earliest (oldest) recording by default.
14.1.2 Track selection
Check a camera selection box to mark those camera tracks to be included in the search.
Only the assigned cameras are listed here. If a camera is assigned multiple times in your
displayed view, only one entry for this camera is listed.
14.1.3 Text filter
Type the text you wish to search for:
– Case sensitive search: check this box to exactly match the case of the typed text to the
text you are searching for.