Specifications

6 720 646 812
40
Operation instructions
5.8 Program button
Fig. 63 “Program” key
5.8.1 Memorizing selected temperature
B Press buttons or to select desired
temperature.
B Hold “Program” button for 3 seconds to save
temperature.
When LCD stops blinking, temperature is saved in
memory.
Using “Program” function
In order to select memorized temperature
B Press “Program” key.
LCD shows pre-memorized temperature, which is now
the hot water selected temperature.
5.9 Locked condition
This condition is only valid for appliances with one or
more remote controls installed.
Fig. 64 Locked condition
Whenever LCD shows the temperature setting
cannot be adjusted because the appliance is in use by
a user which already selected a different temperature.
Appliance will be automatically unlock 5 minutes after
closing hot water tap.