Operation Manual

English–6
Bosch eBike Systems 0 276 001 SPI | (16.7.14)
450 Internal software error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
490 Internal error of the on-board
computer
Have the on-board computer checked
500
Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
502
Bike lighting error Check the light and the associated wiring. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your Bosch eBike
dealer.
510
Internal sensor error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
511
Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
530 Battery pack error Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
531
Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
540
Temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
550
An improper load was detected. Remove load. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
602 Internal battery pack error while
charging
Unplug the charger from the battery pack. Restart the eBike system. Plug
the charger into the battery pack. If the problem persists, contact your
Bosch eBike dealer.
602
Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
603
Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
605 Battery pack temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
605
Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to cool.
If the problem persists, contact your Bosch eBike dealer.
606
External battery pack error Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
610 Battery pack voltage error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
620
Charging error Replace the charger. Contact your Bosch eBike dealer.
640
Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
655 Multiple battery pack errors Switch off the eBike system. Remove the battery pack and reinsert it.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Code Cause Corrective Measure