Installation Instruction

Childproof lock en
17
a After a few seconds, the display shows the changed
cooking time.
a You will see the cooking time counting down.
Clearing the cooking time
1.
If the timer function has been set, press ⁠.
2.
Use the rotary selector to set the cooking time to
⁠ ⁠: ⁠ ⁠.
a After a few seconds, the cooking time is cleared.
The appliance does not interrupt operation.
10.4 Timer
You can specify for a signal to sound after a certain
period of time. The maximum duration of the timer is
24 hours.
The timer works independently of the operation and
other time-setting options. The timer signal is different
to the other signals the appliance sounds.
Setting the timer
1.
Press until is in focus.
2.
Use the rotary selector to set the required timer dur-
ation.
a After a few seconds, the appliance displays the set
timer duration.
a The timer starts.
a lights up in the display.
a You will see the timer duration counting down.
Ending the timer
Requirement:A signal sounds. ⁠ ⁠: is shown in the
display.
▶
Press any symbol.
a The timer is switched off.
Changing the timer
▶
Use the rotary selector to change the timer duration.
a After a few seconds, the appliance displays the set
timer duration.
Cancelling the timer
▶
Use the rotary selector to set the timer duration to
⁠ ⁠: ⁠ ⁠.
a The timer is switched off.
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
11.1 Activating the childproof lock
Requirement:The appliance is switched off.
▶
Press and hold for approx. 4 seconds.
a The control panel is locked.
a The symbol appears in the display.
a If a timer durationhas been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button
11.2 Deactivating the childproof lock
▶
Press and hold for approx. 4 seconds.
a The control panel is unlocked.
12 Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection Description
Signal duration = short = 10seconds
= medium = 30seconds
1
= long = 2minutes
Signal duration after a
cooking time has elapsed
or the timer is set.
Button tone = off
= on
1
Switch the button tones on
or off.
Display brightness = low
= medium
1
= high
Set the brightness of the
display.
Time indicator = off
= on
1
Show the clock time in the
display.
Interior lighting = off
= on
1
Switch the interior lighting
on or off.
1
Factory setting (may vary according to model)