User Manual

en Microwave
16
Setting the microwave to combined
operation
Se t t i n g the microwave to combi ned oper at i on You can combine the microwave function with all types
of heating. The appliance heats up and the microwave
is switched on at the same time. As a result, the food is
ready in a much shorter time.
Combination options
■ < Hot air
■ 7 Hot air grill
■ 2 Pizza setting
■ ( Grill
Exceptions:
! Microwave setting 900 W
< Hot air 40 °C
Setting combined operation
Example: Hot air < 190 ºC with microwave at 360 W,
17 minutes.
1. Use the function selector to set the Hot air <
function.
A default value for the temperature is displayed.
2. Turn the rotary selector to set the desired
temperature.
3. Touch the microwave power output field ! until the
required level is selected in the display.
A default cooking time appears.
4. Set the cooking time using the rotary selector.
5. Touch start l stop.
The operation starts and the start l stop LED lights
up. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds and the start l stop symbol stops
lighting up. Combination mode has finished. Touch any
field to end the acoustic signal.
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Notes
■ Touching it several times switches the power levels
from the highest to the lowest level.
■ If the microwave function is only added after the
start, the appliance pauses. Press start l stop to
start operation
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.