User`s guide

D621 Series | User's Guide | Change Others’ Passcodes (Cmd 56)
Bosch Security Systems | 8/04 | 31
3. Enter your passcode. Point indicators 1, 2, and 3 flash.
Figure 14: Available User Numbers
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
All
Cmd
Part
Status
4. Press [1] to change passcodes. The available user numbers
now flash.
5. Enter the user number you want to change followed by
the [*] key. (For example, press [2] [*] to change the
Passcode for User 2.) The point indicator for that
particular user number now stays on steady.
If the user does not exist in the system, the
keypad emits an error tone.
6. Enter a new passcode with the same number of digits as
the old passcode. If the error tone sounds, try a different
new passcode. Enter the new passcode again for
verification.
7. Press [Cmd]. The available user numbers flash. Repeat
Steps 5 and 6 to change another user passcode, or press
[Cmd] twice to exit.