Data Sheet

Fire Alarm Systems | D7035 Octal Relay Modules
D7035 Octal Relay Modules
www.boschsecurity.com
u Eight Form C programmable relay outputs
u D7035 mounts conveniently inside the FACP
enclosure; no separate enclosure needed
u D7035B includes mounting skirt and enclosure for
mounting outside of the FACP enclosure
u Up to two modules are supported by the FACP
The D7035 Octal Relay Modules include the D7035
and the D7035B. The modules provide eight Form C
relay outputs for the D7024 Fire Alarm Control Panel
(FACP), the FPD-7024 FACP, or the FPA‑1000 Analog/
Addressable Fire Panels. These relay outputs can
connect the FACP with other systems or keypad
inputs. The relays can also be used for door closure,
fan control, annunciators, indicators, or other dry
contact input devices. Normally-open (NO) or
normally-closed (NC) contacts can indicate alarm,
supervisory, or trouble conditions.
The outputs on these modules are programmable.
Each output operates individually from the other seven
outputs on the module for complete flexibility. The
outputs can also be activated by several different
system events. Up to two D7035 or D7035B modules
are allowed on the FACP.
Notice
The D7024 is not listed under UL864, 9th edition.
Certifications and approvals
Region Certification
USA UL UOJZ: Control Units, System (ANSI/UL
864) D7035 only
FM D7035 Family
CSFM see our website
FDNY-
CoA
#6101
FDNY-
CoA
#6173
Installation/configuration notes
Compatibility Information
The following products are compatible with the D7035
and D7035B Octal Relay Modules:
Category Product ID Product Description
Control
Panels
D7024* Addressable FACP
D7024 Conventional FACP
FPD-7024* Addressable FACP
FPD-7024 Conventional FACP
FPA‑1000 Analog Addressable Fire Panels