Data Sheet

ManualsBrandsBosch ManualsAlarm KitsKit Includes D7212GV3/D1255/D8103/ISC-BDL2-WP12G/D101

Intrusion Alarm Systems | D7212GV3 Control Panel

D7212GV3 Control Panel

www.boschsecurity.com

u Fully integrated intrusion and fire functions allow

users to interface with one system instead of two

u Conettix IP‑based communication options provide

high‑speed, secure alarm transport and control

through connection of up to two wired (DX4020)

and/or wireless (ITS‑DX4020‑G) network interfaces

u Four programmable areas with perimeter and

interior partitioning

u 40 points with flexible configuration options to meet

application specific requirements

u Commercial Wireless allows up to 32 RF points

The D7212GV3 Control Panel delivers a powerful new

solution for intrusion (commercial and residential) and

residential fire alarm system applications. Monitor

alarm points for intruder or fire alarms while operating

user command centers and other outputs. The

D7212GV3 Control Panel includes a communicator

that sends event reports to selected public switched

telephone network (PSTN), IP network, or general

packet radio service (GPRS) destinations through four

programmable route groups. Program all system

functions locally or remotely (attended or unattended)

through Remote Programming Software (RPS);

program critical parameters on site through a keypad.

The D7212GV3 Control Panel provides up to 40

individually identified points. Each point

accommodates normally-open and normally-closed

devices with end-of-line (EOL) resistor supervision.

Each point is programmable for fire, fire supervisory,

or intrusion applications.

Functions

Programmable Outputs

• 2 A alarm power at 12 VDC

• 1.4 A auxiliary power at 12 VDC

• Four alarm output patterns

• Automatic bell test

• Three on-board outputs, 24 off-board programmable

outputs

System Response

• High performance micro‑controller provides industry

leading system response

• 31 custom point indexes, including fire supervisory

• Selectable point response time

• Cross point capability

• Fire alarm verification

• Watch mode

• Scheduled events (skeds) arm, disarm, bypass and

unbypass points, control relays, and control authority

levels

Area Configurations

Area programming offers a wide selection of different

system configurations. Each area is assigned an

account number to define annunciation, control, and

reporting functions. Multiple areas can be linked to a

shared area which is automatically controlled (hallway

or lobby). Area arming can be conditional on other

areas (master or associate). Any area can be

configured for perimeter and interior arming, not

requiring a separate are for this function.

Summary of content (7 pages)

PAGE 1
Intrusion Alarm Systems | D7212GV3 Control Panel D7212GV3 Control Panel www.boschsecurity.com The D7212GV3 Control Panel delivers a powerful new solution for intrusion (commercial and residential) and residential fire alarm system applications. Monitor alarm points for intruder or fire alarms while operating user command centers and other outputs.
PAGE 2
| D7212GV3 Control Panel User Interface • Supervises up to eight command centers (up to 32 non-supervised command centers can be used) • Custom keypad text is fully programmable, including remote programming • Four custom functions • Full function command menu including custom functions • Each user has authority by area and 16-character name • 14 custom authority levels control user’s authority to change, add, delete passcodes, delete access control tokens, delete cards, disarm, bypass points, and initi
PAGE 3
| D7212GV3 Control Panel commercial applications. Using a wide range of transmitters and repeaters, this proven technology provides flexibility and performance to meet the most stringent requirements. This exclusive protocol is available only on Commercial Wireless products. The Commercial Wireless platform sends redundant information on several multi-frequency channels within the FCC Part 15 900 MHz band, providing superior range and reliability.
PAGE 4
| D7212GV3 Control Panel ZX938Z PIR Detector Communications Formats ZX970 PIR/Microwave Detector Modem IIIa2 Bosch conventional detectors, including Blue Line, seismic, PIR, TriTech PIR Microwave, photoelectric, heat, and smoke.
PAGE 5
| D7212GV3 Control Panel Technical specifications ISW‑EN1262 PIR Motion Sensor Transmitter (Residential and Low‑traffic Commercial Applications) Communications ISW‑EN1265 PIR Motion Sensor Transmitter (Ceiling‑mount Applications) SDI Bus A (+): 9 VDC 4572 m (15,000 ft) Parts included SDI Bus B (-): 9 VDC 4572 m (15,000 ft) Telephone Connection: RJ31X or RJ38X Quant.
PAGE 6
| D7212GV3 Control Panel placing a trademark symbol in every occurrence of a trademark name, Bosch Security Systems, Inc. uses the names only in an editorial fashion and to the benefit of the trademark owner with no intention of infringing the trademark. D122L Dual Battery Harness with Long Leads Inovonics is a trademark of Inovonics Wireless Corporation.
PAGE 7
| D7212GV3 Control Panel Software Options RPS Kit (DVD-ROM and USB Security Block) Account management and control panel programming software with USB security key (dongle). Order number D5500C-USB Represented by: Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 emea.securitysystems@bosch.com emea.boschsecurity.com North America: Bosch Security Systems, Inc.