Data Sheet
Intrusion Alarm Systems | D7212GV4 Control Panel
D7212GV4 Control Panel
www.boschsecurity.com
u Fully integrated intrusion and fire, allows users to
interface with one system instead of two
u Conettix IP‑based communication options provide
high‑speed, secure alarm transport and control
through connection of wired and/or cellular network
interfaces
u Up to 4 programmable areas, each supporting both
perimeter and interior points
u 40 points with flexible configuration options to meet
multiple installation requirements
u Your choice of touch screen, vacuum florescent,
ATM style or LED keypads
GV4 panels are the premier commercial control panel
line from Bosch. GV4 panels integrate intrusion and
fire, providing one simple user interface for all
systems. With the ability to adapt to large and small
applications, the D7212GV4 provides up to 40
individually identified points that can be split into 4
areas. The control panel includes a communicator that
sends events to selected public switched telephone
network (PSTN), IP network, or cellular network
destinations through four programmable route groups.
With the D7212GV4 you can:
• Monitor alarm points for intruder or fire alarms while
operating keypads and other outputs
• Program all system functions local or remote using
Remote Programming Software (RPS) or by using
basic programming through the keypad user
interface.
Functions
Programmable Outputs
• 2 A alarm power at 12 VDC
• 1.4 A auxiliary power at 12 VDC
• Four alarm‑output patterns
• Programmable bell test
System Response
• High-performance micro‑controller provides
industry‑leading system response
• High-speed device bus (NEW)
• 31 custom point indexes, including fire supervisory
• Selectable point response time
• Cross point capability
• Fire alarm verification
• Fire inspector’s local test
• Watch mode
• Scheduled events (SKEDs) arm, disarm, bypass and
unbypass points, control relays, and control authority
levels
User Interface
• Supervision of up to 8 keypads (up to 32
unsupervised keypads can be used)
• Remote Programming Software (RPS) Lite allows end
users to perform control panel management tasks –
Add/Delete/Change users and authorities, view, and
print the panel history event log
• Custom keypad text is fully programmable, including
remote programming
• Full function command menu including Custom
Functions