Installation guide

F00E900050 KTS 570 / ESI[tronic] INSTALLATION GUIDE
KTS 570 BLUETOOTH® INSTALLATION & SETUP
To utilize the Bluetooth wireless functionality, follow the instructions below:
1. Ensure the KTS 570 is connected to the PC via USB and external power is
supplied to the KTS.
2. Ensure that any internal Bluetooth devices are disabled. Note: The KTS must
use the external Bluetooth dongle for the wireless connection to work.
3. Open the Bosch Diagnostic Device Configuration (DDC) Icon from the
Control Panel.
Win 2000: Click Start > Settings > Control Panel. Double Click the DDC Icon.
Win XP: Click Start> Control Panel
4. Click New.
WARNING:
Prior to installing the Bluetooth® application you must disable any
Bluetooth® drivers that are already installed on your laptop / PC. For instructions please
consult your laptop / PC instructions or contact the manufacturer.