Operating instructions

21
Operating the extractor hood
! The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
as soon as you begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
❑ The fans in this appliance can be swit-
ched to the desired setting by hand
(manual mode) or can be controlled fully
automatically with the automatic function
according to your
requirements (automatic mode).
Switching on manual mode:
Press the L or + button.
❑ The fan starts at Setting
}.
Switching over to automatic mode:
❑ To switch from manual mode to
automatic mode at any time, press the Ü
button.
Fan – off –
Fan settings
– lower –
Fan – on –
Fan settings
– higher –
Intermittent
ventilation
Light
on / off
Display:
❑ Fan settings / Intensive
setting
❑ Saturation –
grease filter
#
❑ Saturation –
activated carbon filter
r ã
Fan
on / off
Switching on the fan settings/intensive
setting:
1. To increase the fan settings or switch on
the intensive setting
ç
, press the +
button.
❑ The intensive setting operates at
maximum power which should be
used only briefly.
If the intensive setting is not switched
off manually, the fan automatically
switches back to Setting
} after
10 minutes.
2. To switch off the intensive setting
ç or
switch back to fan settings
~ – } – |
and
switch off the extractor hood
completely, press the
– button.
Appliances without automatic mode: Appliances with automatic mode:
(Ultraschall-Sensor)
Fan – off –
Fan settings – lower –
Automatic mode
/ Manual mode
Fan – on –
Fan settings – higher –
Intermittent
ventilation
Light
on / off
Display:
❑ Fan settings / Intensive
setting
❑ Saturation –
grease filter
#
❑ Saturation –
activated carbon filter
r ã
Fan
on / off