Operation Manual

1. Remove the filter grille (see operating
instructions).
2. Connect the power.
3. Press the extractor hood up into the
installation opening until the installation
aid locks into position at the front and
rear.
4. Screw in the extractor
hood.
5. Insert and secure the filter grille (see
operating instructions).
1. Loosen the screws.
2. Hold the underside of the extractor
hood, Hold the underside of the extrac-
tor hood.
3. Lower the extractor hood and remove.
Installation
Installation spring
Weight in kg:
Width
53 cm
1-motor
Rocker switch
Design changes with respect to technical development
shall remain withheld
Model
Exhaust
air
Recircu
lated air
5,0 6,3
1-motor
Slide control
1-motor
Slide control
53 cm
73 cm
2-motor
Slide control
2-motor
Slide control
53 cm
73 cm
9,5
8,3
8,7
10,7
9,5
9,9
Removal
10,3 11,6
28
5750.197 457+458.Bo/Si.qxd 24.01.2005 10:08 Uhr Seite 28