Operating Manual
Metros digitales Laser DLR130K Bosch manual ingles www.viaindustrial.com
itales Laser DLR130K Bosch manual ingles www.viaindustrial.com
!
WARNING
instructions
listed
below
may
result
in
electric
General
Safety
Rules
!
DANGER
LASER
RADIATION.
AVOID
DIRECT
EYE
EXPOSURE.
DO
NOT
stare
into
the
laser
light
source.
Never
aim
light
at
another
person
or
object
other
than
the
workpiece.
Laser light can damage your eyes.
Read
all
instructions.
Failure
to
follow
all
shock,
fire
and/or
serious
injury.
Safety
Rules
for
Distance
Measurer
Working
safely
with
the
Distance
Measurer
is
possible
only
when
the
operating
and
safety
information
are
read
completely
and
the
instructions
contained
therein
are
strictly
followed.
Never
make
warning
labels
on
the
Distance
Measurer
unrecognizable.
Never
aim
the
beam
at
a
workpiece
with
a
reflective
surface.
Bright
shiny
reflectiv e
sheet
steel
or
similar
reflective
surfaces
are
not
recommended
for
laser
use.
Reflec tive
surfaces
could
direct
the
beam
back
toward
the operator.
Take
care
to
recognize
the
accuracy
and
range
of
the
device.
Use
of
controls
or
adjustments
or
performance
of
procedures
other
than
those
specified
herein
may
result
in
hazardous
radiation
exposure.
The
use
of
optical
instruments
with
this
Have
the
Distance
Measurer
repaired
only
through
qualified
specialists
using
original
spare
parts.
This
ensures
that
the
safety
of
the Distance Measurer is maintained.
Do
not
allow
children
to
use
the
Distance
Measurer
without
supervision.
They
could
unintentionally blind other persons.
Do
not
point
the
laser
beam
at
persons
or
animals
and
do
not
look
into
the
laser
beam
yourself,
not
even
from
a
large
distance.
Do
not
use
the
laser
viewing
glasses
as
safety
goggles.
The
laser
viewing
glasses
are
used
for
improved
visualization
of
the
laser
beam,
but
they
do
not
protect
against
laser radiation.
Do
not
use
the
laser
viewing
glasses
as
sun
glasses
or
in
traffic.
The
laser
viewing
glasses do not afford complete UV protection
and reduce color perception.
product
will
increase
eye
hazards.
Safe
Operating
Procedures
WARNING:
Be
sure
to
read
and
understand
all instructions in this manual before using this
product.
Failure
to
follow
all
instructions
may
result
in
hazardous
radiation
exposure,
electric shock, fire, and/or bodily injury.
CAUTION:
Use
of
controls
or
adjustments
or
performance
of
procedures
other
than
those
specified
in
this
manual,
m ay
result
in
hazardous radiation exposure.
CAUTION:
The use of optical instruments with
this product will increase eye hazard.
IMPORTANT:
The
following
labels
are
on
your
laser
tool
for
your
convenience
and
safety.
They
indicate
where
the
laser
light
is
emitted by the level. ALWAYS BE AWARE of
their location when using the level.
ALWAYS
make
sure
that
any
bystanders
in
the
vicinity
of
use
are
m ade
aware
of
the
dangers of looking directly into the laser tool.
DO
NOT
remove
or
deface
any
warning
or
caution labels. Removing labels increases the
risk of exposure to laser radiation.
DO
NOT
stare
directly
at
the
laser
beam
or
project the laser beam directly into the eyes of
others. Serious eye injury could result.
-5-