User`s guide

Page 22
Emergency Keypad Alarms / Silencing Alarms
The Emergency Alarm Keys [A], [B], and [C] may generate Fire, Special Emergency, and Panic Alarms if programmed by the installer. Ask your
installing company to explain the function of these keys.
When using the Emergency Alarm Keys, they must be pressed for two seconds to generate an alarm.
Note: If the Emergency Alarm Keys are to be used, they should be labeled to signify their functions.
The A key should be labeled as the Fire key. This is the only key that may be designated as the Fire key.
The B key should be labeled as the Special Emergency key.
The C key should be labeled as the Panic key.
Use the Disarming Command Sequence to cancel or silence these alarms.
Armed
Status
Power
Fire
Perimeter
Supervisory
Bell Silenced
Trouble
1 2 3 4 5 6 7 8
1 2 3
4 5 6
7 8 9
0
*
#
On
No
Entry
System
Reset
Bypass
Only
Perimeter
Off
Armed
Status
Power
Fire
1 2 3
4 5 6
7 8 9
0
*
#
On
No
Entry
System
Reset
Bypass
Only
Perimeter
Off
On
No
Entry
System
Reset
Bypass
Perimeter
Only
Off
321
654
987
#0
*
Fire
Armed
Status
1
2
3
4
5
6Power
TEST WEEKLY
A B C
A B C
A B C