Spec Sheet

1 |Intrusion DS9370 Series Ceiling-Mount Panoramic TriTech Detectors
Security you can rely on.
Family 1.1.1
123 456 789
DS9370 Series Ceiling-Mount,
Panoramic TriTech
®
Detectors
The DS9370 Series TriTech detectors
can be used on ceilings as high as 25
ft (7.6 m). The combination of passive-
infrared (PIR) detection, microwave
detection, and advanced signal pro-
cessing techniques allows TriTech de-
tectors to rapidly respond to human
targets without triggering false alarms
from other sources. With three sepa-
rate PIR sections that are fully adjust-
able, coverage can be customized for
specific areas at all mounting heights.
Series Features
Up to 25 ft (7.6 m) mounting height
Fully-adjustable optical arrays for coverage customiza-
tion
Hinged chassis and base plate for easy installation
High-efficiency LED and light-pipe system for easy walk
testing
First Step Processing (FSP)
Microwave adaptive processing
360° x 70 ft (20 m) diameter pattern
Series Functions
Advanced signal processing
These detectors use PIR and microwave technologies to signal
an alarm when the fields of protection of both technologies are
activated at the same time. The PIR and microwave sensitivi-
ties are adjustable.
Adaptive processing uses pattern recognition circuitry to iden-
tify and ignore repetitive false alarm sources. It adjusts to back-
ground disturbances to reduce false alarms without sacrificing
the ability to respond to an intruder.
First Step Processing (FSP) allows virtually instant response to
human targets without generating false alarms for other
sources. FSP adjusts the detector's sensitivity based on signal
amplitude, polarity, slope, and timing. This eliminates the
need for the installer to select the sensitivity level. Each sensor
(PIR and microwave) is processed individually, and the alarm
relay does not activate unless both sensors agree there is an
alarm.
Microwave supervision
The microwave circuit is fully-supervised. If the microwave
subsystem fails, the PIR subsystem provides single technology
coverage.
Test features
The high-efficiency LED and light-pipe system provide
walk test indication that is easily viewable from any an-
gle and at any mounting height.
The alarm memory feature allows the detector to latch
the alarm LED to aid in response.
The walk test LED can be activated remotely by a control
panel command.

Summary of content (4 pages)