Installation Manual
Manuals
Brands
Bosch Manuals
Recording
Dual controller Unit 12X4TB
39
40
41
42
43
44
45
46
47
48
Table Of Contents
Table of contents
1 Safety
1.1 Safety message explanation
1.2 Safety precautions
1.3 Important safety instructions
1.4 Warning notices
1.5 Caution notices
1.6 Notices
2 Before you begin
2.1 Hardware registration
2.2 Additional equipment
2.3 Additional documentation
3 System overview
3.1 Device views
3.2 LED description
3.2.1 LEDs on the operator display panel
3.2.2 LEDs on the controller unit
3.2.3 LEDs on the I/O modules
3.2.4 LEDs on the drives
3.2.5 LEDs on the power-fan canister
3.2.6 Seven-segment-display
4 Installation
4.1 Installing a 2U 12-bay unit
4.2 Installing the front bezel and end caps
4.3 Setting the unit ID using the ODP button
5 Connection
5.1 Connecting the expansion units
5.2 Connecting the controller unit to the network
5.3 Connecting the controller unit to the management hosts
5.4 Connecting the units to the power supply
5.5 Supported connections
6 Turning on/off AC power
6.1 Turning on AC power
6.2 Turning off AC power
7 Configuring the storage system
8 Maintenance
8.1 Replacing a drive in a 12-bay unit
8.1.1 Preparing to replace a drive
8.1.2 Removing a drive
8.1.3 Installing a drive
8.1.4 After replacing a drive
8.2 Replacing a power-fan canister
8.2.1 Preparing to remove a power-fan canister
8.2.2 Removing a power-fan canister
8.2.3 Installing a power-fan canister
8.2.4 After replacing a power-fan canister
8.3 Seven-segment display codes
8.3.1 Seven-segment display sequence codes
8.3.2 Seven-segment display codes when controller turns on
8.3.3 Seven-segment display use cases
8.3.4 Seven-segment display lock-down codes
8.4 Collecting support data for the storage system
Blank Page
Blank Page
Blank Page
1
...
...
43
44
45
46
47
...
48