Quick Installation Guide

14 en | Installation DSA E-Series (E2800 12-bay)
2017.12 | V1 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH
Caution: A fully loaded unit weighs approximately 65 lb (29 kg). Two persons or a
mechanical lift are required to safely move the unit.
4. Carefully slide the unit all the way onto the rails.
Note: If applicable, you might need to remove the end caps or the system bezel to secure
the unit to the rack post. Replace the end caps or bezel when you are done.
Note: You might need to adjust the rails to ensure that the unit slides all the way onto the
rails.
Note: Do not place additional equipment on the rails after you finish installing the unit.
The rails are not designed to bear additional weight.
5. Secure the unit to the front of the rack or system cabinet and rails by inserting two M5
screws through the mounting brackets (preinstalled on either side of the front of the
unit), the holes on the rack or system cabinet, and the holes on the front of rails.