Quick Installation Guide

DSA E-Series (E2800 12-bay) Connection | en 19

Bosch Sicherheitssysteme GmbH Quick Installation Guide 2017.12 | V1 | DOC

1 Private network 2 Management station or personal

computer

3 Local Area Network (LAN) 4 Switch or hub

5 Dual controller unit 6 ControllerA

7 ControllerB 8 Management port1 (Ethernet)

Note: Used as default.

9 Management port2 (Ethernet)

Note: Reserved for maintenance

operations if the hardware contains a

second Ethernet port.

Notice!

Ethernet port 2 should be reserved for maintenance operations if your hardware contains a

second Ethernet port.

5.4 Connecting the units to the power supply

To connect the controller unit and the expansion units to the power supply:

1. Confirm that the two power switches on the controller unit are off.

Note: If you have expansion units, confirm that their power switches are off.