Installation Manual
Table Of Contents
- Table of contents
- 1 Safety
- 2 Before you begin
- 3 System overview
- 4 Installation
- 5 Connection
- 6 Turning on/off AC power
- 7 Configuring the storage system
- 8 Maintenance
- Blank Page
- Blank Page
- Blank Page
DSA E-Series (E2800 60-bay) System overview | en 13
Bosch Sicherheitssysteme GmbH Installation manual 2018.02 | V1 | DOC
1
2
3
4
5
1 7-segment display 2 Power LED
3 Attention LED 4 Locate LED
5 Drive canister
The following table describes the LEDs and their operational states:
LED Status indicator Description
Power Green One or more power supplies are
supplying power to the unit.
Off The unit is not receiving power.
Attention Amber There is an error with the function of
one or more of the following:
– Unit
– Drives
– IOMs
– Power supplies
– Fans
Off The unit, drives, IOMs, power supply,
and fans are functioning correctly.
Locate Blue There is an active request to physically
locate the shelf.
Note: The Locate LED turns off
automatically after 30minutes.
3.2.2 LEDs on the controller unit
The back of the controller unit includes LEDs that indicate the status of the controller. For
example, the controller is active, the controller needs attention, or when there is Ethernet
activity.