Installation Manual

DSA E-Series (E2800 60-bay) System overview | en 17
Bosch Sicherheitssysteme GmbH Installation manual 2018.02 | V1 | DOC
1 Activity LED 2 Attention LED
The following table describes the LEDs and their operational states:
LED Status indicator Description
Activity Green The drive has power.
Blinking green The drive has power, and I/O is in
process.
Attention Amber An error occurred with the functioning
of the drive.
3.2.5 LEDs on the drive drawer
Each of the 5drive drawers in the 60-bay controller unit and the 60-bay expansion unit
includes a single Attention/Locate LED for the unit and 12 Activity LEDs for the drives.
1
5 9 136 107 11
2 3 4
8 12
1 Attention/Locate LED 2-13 Activity LEDs
The following table describes the LEDs and their operational states:
LED Status indicator Description
Attention/Locate LED Amber The drawer or a drive in the drawer
requires operator attention.
Off The drawer and all drives in the drawer
are operating normally.
Blinking A locate operation for a drive in the
drawer is in progress.
Activity LEDs
(for drives 0 through 11 in the
drive drawer)
Green The power is turned on and the drive is
operating normally.
Off The power is turned off.
Blinking Drive I/O activity is taking place.
Within a drive drawer, there are 12drive slots numbered 0 through 11. Each drive uses an
amber Attention LED that comes on if the drive requires operator attention