Installation Manual
Table Of Contents
- Table of contents
- 1 Safety
- 2 Before you begin
- 3 System overview
- 4 Installation
- 5 Connection
- 6 Turning on/off AC power
- 7 Configuring the storage system
- 8 Maintenance
- Blank Page
- Blank Page
- Blank Page
18 en | System overview DSA E-Series (E2800 60-bay)
2018.02 | V1 | DOC Installation manual Bosch Sicherheitssysteme GmbH
0 Attention/Locate drive LED0 1 Attention/Locate drive LED1
2 Attention/Locate drive LED2 3 Attention/Locate drive LED3
4 Attention/Locate drive LED4 5 Attention/Locate drive LED5
6 Attention/Locate drive LED6 7 Attention/Locate drive LED7
8 Attention/Locate drive LED8 9 Attention/Locate drive LED9
10 Attention/Locate drive LED10 11 Attention/Locate drive LED11
The LED status of the drives are indicated as follows:
– Amber: The drive in the drawer requires operator attention.
– Off: The drive in the drawer is operating normally.
– Blinking: A locate operation for the drive is in progress.
3.2.6 LEDs on the power canister
The power canister has LEDs and its own power switch and power outlet. Each 60-bay
controller unit and 60-bay expansion unit contains two power canisters.
1 2
1 Power LED 2 Attention LED
The following table describes the LEDs and their operational states: