Installation Manual

24 en | Installation DSA E-Series (E2800 60-bay)
2018.02 | V1 | DOC Installation manual Bosch Sicherheitssysteme GmbH
2. Tighten the round-to-square hole adapter brackets with the screws to the four rack posts.
Leave enough room for the hook-piece of the rail between the rail adapters and the rack
posts.
x 4
M4x10
3. Attach the rails to the rack or system cabinet as follows:
– Hook in the left rail in the adapter brackets and tighten all screws completely to hold
the rail firmly in place.
– Repeat this step for the right rail.
1
2
1
2
M4x15
4. Place the back of the unit (the end with the connectors) on the rails.