Quick Installation Guide

DSA E-Series (E2800 60-bay) Table of contents | en 3
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2017.12 | V1 | DOC
Table of contents
1
Safety 4
1.1 Safety message explanation 4
1.2 Safety precautions 4
1.3 Important safety instructions 4
1.4 Warning notices 6
1.5 Caution notices 7
1.6 Notices 7
2
Before you begin 9
2.1 Hardware registration 9
2.2 Additional equipment 9
2.3 Additional documentation 9
3
Device views 10
4
Installation 12
4.1 Installing a 60-bay unit 12
4.2 Installing a 60-bay unit with SuperRail 13
4.2.1 Installing SuperRail to square-hole four-post rack 13
4.2.2 Installing SuperRail to round-hole four-post rack 15
4.3 Installing the front bezel and end caps 17
4.4 Installing the drives 18
5
Connection 19
5.1 Connecting the expansion units 19
5.2 Connecting the controller unit to the network 19
5.3 Connecting the controller unit to the management hosts 20
5.4 Connecting the units to the power supply 21
5.5 Supported connections 22
6
Turning on/off AC power 24
6.1 Turning on AC power 24
6.2 Turning off AC power 24
7
Installing and configuring the storage array 25