Operation Manual

EC Directives:
European Union Law Directive 2000/84/EC
Low Voltage Directive (2006/95/EC)
Electro-Magnetic Compatibility Directive (89/336/EEC)
EC Marking Directive (93/68/EEC)
STANDARD PACKAGE:
Programmable RF receiver
Remote RF transmitter
Screws (x2)
Wall Plugs (x2)
Instructions
Batteries (x2) AA Alkaline
DESCRIPTION UNITS DT10RF Receiver Digistat Transmitter
Dimensions mm -- 137 x 96.5 x 31.3
Electrical supply V 24 3
Radio frequency MHz 433 433
Radio signal range The range may be affected by the composition / density and
number of walls between the Digistat RF and receiver.
30 metres typically, through two internal plasterboard walls and
a ceiling.
26 metres typically, through three internal plasterboard walls
and a ceiling.
17 metres typically, through two internal plasterboard walls a
ceiling and one external cavity wall.
These distances are provided for guidance only, many factors
can affect the range of the transmitter, including metal
pipework, appliances and even furniture.
Temperature range °C 5 to 32 5 to 32
Ambient operating temperature °C 0 to +50 0 to +40
Humidity operating range % non condensing
up to 45°C
30 to 95 25 to 90
Class of operation II --
Degrees of protection IP 24 30
Accuracy at 25°C sec/day better than ±1 -
Battery life (with alkaline batteries) years N/A approx. 2
Battery back up time and date years min. 10 10
Shortest switching period minutes 1 1
Hot water pre-heat settings number 3 ON / 3 OFF --
Central heating settings number -- 6
Hot water and Central heating programs days 7 1
TECHNICAL DATA
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
1
8_716_115_493a 9/2/09 09:45 Page 5