Installation manual

Bosch Security Systems | Version 1.1
DVR4C | Installation Manual | EN | 6
U.S.A. models only--Section 810 of the National Electrical
Code, ANSI/NFPA No.70-1981, provides information with
respect to proper grounding of the mount and supporting
structure, grounding of the coax to a discharge unit, size of
grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode.
22. To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this
apparatus.
23. Danger of explosion if battery is incorrectly replaced. A
lithium battery is located inside the enclosure of this
recorder. Replace only with the same or equivalent type.
Dispose of the replaced battery in an environmentally
friendly way.
Cleaning
You can clean the unit with a moist fluff-free cloth or
shammy leather cloth.
Remark
Bosch has a strong commitment towards the environment.
This unit has been designed to respect the environment as
much as possible.
Warning
This device is intended for use in public areas only.
Surreptitious recording of oral communications is strictly
prohibited by U.S. Federal law.
Note
Any change or modification not expressly approved by
Bosch of the equipment authorization could void the user's
authority to operate the equipment. For additional
information or to speak to a representative, please contact
the Bosch Security Systems location nearest you or visit our
web site at www.boschsecuritysystems.com
FCC INFORMATION
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
Reference
Icons shown on the screen
Play forward
Play reverse
Sound
Pause, Freeze
Zoom
Sequence