Data Sheet

ManualsBrandsBosch ManualsElectronicsUniversal Transmitter with Wall Tamper

Intrusion Alarm Systems | EN1215 Series Universal Transmitters

EN1215 Series Universal Transmitters

www.boschsecurity.com

u Programmable as normally‑open (NO) or

normally‑closed (NC)

u Small unobtrusive design

u Fully supervised

u Includes screw‑closure housing, cover tamper, wall

tamper

u Includes EOL resistor

These universal transmitters can make most

normally‑open (NO) or normally‑closed (NC) sensors

into wireless devices. The transmitters work with

shock sensors, holdup buttons, pressure mats,

temperature sensors, status relays, and other devices.

They are designed for installations that require more

security. They are fully supervised and include

screw‑closure housings, cover tampers, and wall

tampers.

This line of universal transmitters includes:

• EN1215EOL Universal Transmitter with Wall Tamper

and EOL Resistor

• EN1215WEOL Universal Transmitter with Wall

Tamper, Reed Switch, and EOL Resistor

The Inovonics EchoStream platform uses diversity

reception and advanced signal processing to reduce

dead spots in transmission areas. The transmitters

have superior range and reliability, and are ideally

suited for commercial or residential installations.

System overview

The Inovonics EchoStream platform, powered by

Inovonics wireless mesh network technology, ensures

superior range, reliability, and scalability for

commercial applications. Using a wide range of

transmitters and repeaters, this proven technology

provides flexibility and performance to meet the most

stringent requirements. This exclusive protocol is

available only on Inovonics EchoStream products.

Wireless 900 MHz Band

The Inovonics EchoStream platform sends redundant

information on several multi‑frequency channels within

the FCC Part 15 900 MHz band, providing superior

range and reliability. In comparison, systems that use a

single frequency technology can only send information

on one narrow band channel. Any interference within

the band can cause missed signals. With wireless

registration, it is easy to add this technology to any

application.

Functions

NO or N/C Operation

The universal transmitters work with any standard NO

or NC contact (15 ms duration) or sensor.

Supervision

The cover tamper, wall tamper, and battery activity are

supervised. Monitoring helps ensure reliable

operation.

Summary of content (3 pages)

PAGE 1
Intrusion Alarm Systems | EN1215 Series Universal Transmitters EN1215 Series Universal Transmitters www.boschsecurity.com These universal transmitters can make most normally‑open (NO) or normally‑closed (NC) sensors into wireless devices. The transmitters work with shock sensors, holdup buttons, pressure mats, temperature sensors, status relays, and other devices. They are designed for installations that require more security.
PAGE 2
| EN1215 Series Universal Transmitters Wall Tamper and Cover Tamper The wall tamper switch provides increased security and is ideal for high‑end residential applications. The wall tamper switch notifies the system when the transmitter is removed from its mounted surface. The cover tamper switch notifies the system when an intruder attempts to remove the transmitter cover. Design The small, unobtrusive design of the transmitters makes them suitable for multiple design needs.
PAGE 3
| EN1215 Series Universal Transmitters Represented by: Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.