Installation manual

AUTODOME USER COMMANDS

UNLOCKED COMMANDS

User Manual Commands

Commands Keystrokes Description

Scan ON/OFF-1-ENTER Camera continuously pans in the last direction that the joystick was moved. Moving the joystick stops the scan.

AutoPan ON/OFF-2-ENTER Camera continuously pans back and forth between limits. Moving the joystick stops the scan.

Preset Menu SET-100-ENTER Permits modification of Preset scenes from an on-screen menu (recommended).

Preset Tour ON/OFF-8-ENTER Camera cycles through Preset Scenes. Moving the joystick stops the tour.

Preset Tour ON/OFF-15-ENTER On-screen menu changes the length of waiting time between presets.

Period

Preset Save SET-1-99-ENTER Stores the current scene and camera settings in memory. Preset 1 is shown when the camera is initialized.

Preset Call SHOT-1-99-ENTER Recalls the scene and camera settings from memory.

Edit Preset Title ON/OFF-62-ENTER Modifies the Preset names. On-screen instructions are provided.

Edit Preset Tour SET/SHOT-900-ENTER Presets can be removed/restored (On/Off) from the Preset tour, via an on-screen menu. Presets can still be

displayed manually.

Modify SET/SHOT-901-999-ENTER Presets can individually be removed/restored (On/Off) from the Preset tour.

Preset Tour Example: SET-915-ENTER will clear Preset 15 from the tour. Presets can still be displayed manually.

Alarm Clear/ ON/OFF-65-ENTER If an alarm has been activated and the ALARM message is being displayed, it may be cleared by using

Relay Output OFF-65-ENTER once. When OFF-65 ENTER is pressed again, the relay output will be deactivated.

ON-65-ENTER will activate the relay output regardless of alarm conditions.

Record A ON/OFF-100-ENTER Records “A” camera and PTZ controls, that can be played back. Once the sequence is recorded, you must exit

record to play back.

Record B ON/OFF-101-ENTER Records “B” camera and PTZ controls, that can be played back. Once the sequence is recorded you must exit

record to play back.

Continuous ON/OFF-50-ENTER Camera will repeat “A” recorded sequence.

Playback A

Playback A ON/OFF-51-ENTER Camera will play the “A” recorded sequence once.

Continuous ON/OFF-52-ENTER Camera will repeat “B” recorded sequence.

Playback B

Playback B ON/OFF-53-ENTER Camera will play the “B” recorded sequence once.

Scan+Auto ON/OFF-14-ENTER On-screen menu allows the setting of the

Pan Speed AutoPan and AutoScan speeds. Default is 30 degrees/second.

Backlight ON/OFF-20-ENTER Camera will adjust for a bright background.

Compensation

View Factory ON-47-ENTER Displays the factory default settings.

Settings

Software Version ON-66-ENTER Briefly displays the camera software versions.

Night Mode ON/OFF-57-ENTER Switches from color to monochrome (Day/Night models only).

Day/Night Menu ON-56-ENTER On-screen menu changes Night Mode setting (On/Off/Auto; Day/Night only).

AutoTrack ON/OFF-78-ENTER Allows the operator to turn tracking On and Off (AutoTrack Option only).

PTZ

PRESET

ALARM

RECORD

SETUP