Datasheet
18 19
CONCERT INSTALL PORTABLE PA
CONCERTINSTALLPORTABLE PA
LOUDSPEAKERS
LOUDSPEAKERS
EVH-1152S/43 EVH-1152S/64 EVH-1152S/66 EVH-1152S/94 EVH-1152S/96 EVH-1152S/99
Frequency Response (-3 dB) 60 Hz – 15 kHz
1
Frequency Range (-10 dB) 50 Hz – 20 kHz
1
Recommended High-Pass Frequency 60 Hz
Sensitivity (SPL, 1 W/1 m) 106 dB 105 dB 105 dB 105 dB 105 dB 104 dB
Max. SPL @ 1 m (calc.) 139 dB 138 dB 138 dB 138 dB 138 dB 137 dB
System Power Handling (Continuous
2
,
Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6 Ω
Input Connections Euroblock; PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H° x V° 40° x 30° 60° x 40° 60° x 60° 90° x 40° 90° x 60° 90° x 90°
LF Transducer 15" SMX2151 driver
HF Transducer 2" ND2B diaphragm compression driver
Internal Passive Crossover Frequency 1,300 Hz
Enclosure Material 13-ply weather-resistant birch
Grille
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Suspension 28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D) 30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
Net Weight 143 lb (64.9 kg)
EVH-1152D/43 EVH-1152D/64 EVH-1152D/66 EVH-1152D/94 EVH-1152D/96 EVH-1152D/99
Frequency Response (-3 dB) 60 Hz – 17 kHz
1
Frequency Range (-10 dB) 50 Hz – 20 kHz
1
Recommended High-Pass Frequency 60 Hz
Sensitivity (SPL, 1 W/1 m) 106 dB 105 dB 105 dB 105 dB 105 dB 104 dB
Max. SPL @ 1 m (calc.) 139 dB 138 dB 138 dB 138 dB 138 dB 137 dB
System Power Handling
(Continuous
2
, Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6 Ω
Input Connections Euroblock; PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H° x V° 40° x 30° 60° x 40° 60° x 60° 90° x 40° 90° x 60° 90° x 90°
LF Transducer 15" SMX2151 driver
HF Transducer 3" DH7N diaphragm compression driver
Internal Passive Crossover Frequency 1,300 Hz
Enclosure Material 13-ply weather-resistant birch
Grille
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Suspension 28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D) 30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
Net Weight 145.5 lb (66.1 kg)
1
Half-space measurement in passive mode
2
EIA RS-426A (eight hours)
• Ideal for reverberant spaces
• Pattern control maintained below 500 Hz
• 15" SMX2151 woofer
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns
from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three
finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVH Horn-Loaded Systems
EVH STANDARD TWO-WAY SYSTEMS
EVH HIGH DEFINITION TWO-WAY SYSTEMS
EVH-1152S
TWOWAY COAXIAL HORNLOADED FULLRANGE LOUDSPEAKERS
The EVH series is a dedicated installed sound solution
that builds on everything Electro-Voice has learned about
full-range, horn-loaded systems. Delivering exceptional
value in venues of all sizes, these mid-sized 15" two-way
cabinets feature a unique coaxial horn-loaded design
that is unmatched for pattern control and intelligibility in
reverberant environments.
A 400 W SMX2151 woofer provides the EVH's deep, rich
lows, while horn loading extends directivity control below
500 Hz. High frequencies are handled by a pure titanium
compression driver—either a standard 2" ("S" models) or
a premium 3" with neodymium magnetic structure (high
definition "D" models)—protected by an advanced fourth-
order crossover network. Six coverage patterns (ranging
from 40° x 30° to 90° x 90°) on rotatable Constant
Directivity waveguides offer extraordinary versatility.
Three finishes are available, including two for outdoor
applications. EVH loudspeakers come installation-ready
with 28 M10-threaded suspension points, making rigging
extremely flexible. Wherever extended pattern control
is a priority, the EVH series provides a proven, effective
solution.
EVH systems are mechanically compatible with the EVF subs.
• Ideal for reverberant spaces
• Pattern control maintained below 500 Hz
• 15" SMX2151 woofer
• 3" DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns
from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three
finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVH-1152D
HIGH DEFINITION TWOWAY COAXIAL HORNLOADED FULLRANGE LOUDSPEAKERS
See page 48–49 for EVH Rigging and Accessories.