Datasheet

24 25
CONCERT INSTALL PORTABLE PA
CONCERTINSTALLPORTABLE PA
LOUDSPEAKERS
LOUDSPEAKERS
EVI-12 EVI-15 EVI-28
Frequency Response (-10 dB) 50 Hz – 20 kHz 50 Hz – 20 kHz 60 Hz – 20 kHz
Sensitivity (SPL 1 W/1 m) 99 dB 100 dB 93 dB
Max. SPL/1m (calc.) 129 dB 130 dB 123 dB
Power Handling (Continuous, Peak) 250 W, 1000 W 250 W, 1000 W 250 W, 1000 W
Coverage, H x V 60° x 70° long throw, 110° x 90° short throw 65° x 65° long throw, 110° x 65° short throw 65° x 65° long throw, 110° x 65° short throw
LF Transducer 12" 15" Two 8"
HF Transducer 1.25" DH3/2010A compression driver (1" exit) 1.25" DH3/2010A compression driver (1" exit) 1.25" DH3/2010A compression driver (1" exit)
Crossover frequency 2,000 Hz 2,000 Hz 2,000 Hz
Nominal impedance (minimum) 8 Ω 8 Ω 8 Ω
Input connections Screw terminal Screw terminal Screw terminal
Dimensions (H x W at front x D) 21.8" x 14" x 27.5" (554 x 356 x 699 mm) 23" x 16.9" x 30.2" (584 x 429 x 766 mm) 13.9" x 19.5" x 20.6" (353 x 496 x 523 mm)
Net Weight 48 lb (21.8 kg) 53 lb (24.0 kg) 36 lb (16.3 kg)
Length = 3H
Width = 2H
H
H
EVI VARIABLE INTENSITY COVERAGE PATTERN (3-2-1 RULE):
If speaker mount-height = H, then coverage length = 3H, coverage width = 2H and first row coverage = 1H
EVI Variable Intensity Loudspeaker Systems
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• High sensitivity
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
EVI-12
12" TWOWAY VARIABLE INTENSITY LOUDSPEAKER
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• High sensitivity
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
EVI-15
15" TWOWAY VARIABLE INTENSITY LOUDSPEAKER
• Ideal for reverberant spaces
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Stacked, frequency-shaded woofers
for pattern control below 500 Hz
• Three 3/8" hanging points
EVI-28
DUAL 8" TWOWAY VARIABLE INTENSITY LOUDSPEAKER
EVI provides a simple, economical solution for permanent
installations requiring even coverage over a fixed
rectangular area. In a typical room, the distance from
a front-mounted loudspeaker to the last row is two
or more times the distance to the front row, resulting
in a substantial front-to-back difference in level and
intelligibility. The Variable Intensity horn counters this
problem by increasing the sound sent to the back of the
room by six to eight dB, balancing SPL distribution without
the expense and complexity of additional systems or
components.
See page 49 for EVI Rigging and Accessories.