Datasheet
60 61
ELECTRONICS
ELECTRONICS
CPS 2.4 CPS 2.6 CPS 2.9 CPS 2.12
Topology Class-AB Class-AB Class-H Class-H
Impedance 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω
Continuous Output Power(1 kHz, THD 1%) 650 W 450 W 270 W 900 W 600 W 380 W 1250 W 900 W 550 W 1800 W 1200 W 750 W
Continuous Output Power(20–20,000 Hz,
THD<0,2%)
400 W 200 W 500 W 250 W 800 W 400 W 1100 W 550 W
Maximum Bridged Output 1300 W 900 W 1800 W 1200 W 2800 W 1800 W 3600 W 2400 W
Amplifier Gain 32 dB 32 dB 32 dB 32 dB
Frequency Response 10 Hz – 40 kHz (±1 dB) 10 Hz – 40 kHz (±1 dB) 10 Hz – 40 kHz (±1 dB) 10 Hz – 40 kHz (±1 dB)
Total Harmonic Distortion 0.03% 0.03% 0.03% 0.03%
Intermodulation Distortion (SMPTE) 0.1% 0.05% 0.1% 0.1%
DIM 30 0.05% 0.02% 0.05% 0.05%
Slew Rate 25 V/µs 26 V/µs 27 V/µs 30 V/µs
Analog Inputs 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type
Input Impedance (Balanced) 20 kΩ 20 kΩ 20 kΩ 20 kΩ
Input Sensitivity 2.2 dBu (1.0 V) +3.1 dBu (1.11 Vrms) +5.1 dBu (1.39 Vrms) +6.6 dBu (1.66 Vrms)
Maximum Input Voltage +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms)
Crossover Type Optional Modules Optional Modules Modular Modular
Network Control (IRIS-Net) Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card)
CAN Bus Interface Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card)
Variable Load Drive (VLD) No No No No
Cooling Front-to-rear, 3-stage fans Front-to-rear, 3-stage fans Front-to-rear, 3-stage fans Front-to-rear, 3-stage fans
Dimensions (H x W x D)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
Net Weight 27.8 lb (12.6 kg) 32.63 lb (14.8 kg) 35.94 lb (16.3 kg) 39.0 lb (17.7 kg)
CPS 4.5 CPS 4.10 CPS 8.5
Topology Class-D Class-D Class-D
Impedance/Voltage 2 Ω 4 Ω 8 Ω 8 Ω VLD 70V/100V 2 Ω 4 Ω 8 Ω 8 Ω VLD 70V/100V 2 Ω 4 Ω 8 Ω 8 Ω VLD 70V/100V
Continuous Power/Channel (1 kHz, THD 1%) 500 W 500 W 250 W 500 W 500 W 1000 W 1000 W 500 W 1000 W 1000 W 500 W 500 W 250 W 500 W 500 W
Continuous Power/Channel (20-20,000
Hz, THD < 0.3%)
450 W 450 W 225 W 450 W 450 W 900 W 900 W 450 W 900 W 900 W 450 W 450 W 225 W 450 W 450 W
Maximum Bridged Output 1000 W 1000 W 1000 W 2000 W 2000 W 2000 W 1000 W 1000 W 1000 W
Amplifier Gain 32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V) 32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V) 32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
Frequency Response 15 Hz – 30 kHz 15 Hz – 30 kHz 15 Hz – 30 kHz
Signal-to-Noise Ratio, A-weighted (4 Ω) 100 dB 103 dB 100 dB
Total Harmonic Distortion 0.05% 0.05% 0.05%
Intermodulation Distortion (SMPTE) 0.05% 0.05%
DIM 30 0.02% 0.02% 0.02%
Slew Rate 28 V/µs 28 V/µs 28 V/µs
Analog Inputs 4, electronically balanced, Phoenix-type 4, electronically balanced, Phoenix-type 8, electronically balanced, Phoenix-type
Input Impedance (Balanced) 20 kΩ 20 kΩ 20 kΩ
Input Sensitivity
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
Maximum Input Voltage +22 (9.76 Vrms) +22 (9.76 Vrms) +22 (9.76 Vrms)
Network Control (IRIS-Net) Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card)
CAN Bus Interface Optional (RCM-810 card) Optional (RCM-810 card) Optional (RCM-810 card)
Variable Load Drive (VLD) Ye s Yes Ye s
Cooling Front-to-rear, continuously variable fans Front-to-rear, continuously variable fans Front-to-rear, continuously variable fans
Dimensions (H x W x D) 3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm) 3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm) 3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
Net Weight 24.47 lb (11.1 kg) 24.47 lb (11.1 kg) 30.64 lb (13.9 kg)
Compact Precision amplifiers combine outstanding audio
performance with the highest-possible reliability and
safety to create an ideal high-power solution for touring
and rentals. Incorporating an innovative switchmode
power supply into Class-H technology, the CP series
delivers clean headroom that is far above stated nominal
output. This advanced design also results in improved
performance-to-weight ratio for easier touring, reduced
waste heat for closer rack spacing and reduced power
consumption for enhanced energy efficiency. A complete
set of protection circuitry guards people and equipment
against hazardous conditions, and a rigid, robust chassis,
built to the highest precision manufacturing standards,
ensures dependable operation on even the most grueling
tours. With exceptionally clean power and tour-friendly
touches that facilitate fast, flexible setup, Compact
Precision amplifiers fulfill even the most demanding
requirements of pro audio touring.
CP3000S CP4000S
Topology Class-H Class-H
Impedance 2 Ω 4 Ω 8 Ω 2 Ω 4 Ω 8 Ω
Maximum power (1k Hz; THD <1%) 1600 W 1100 W 600 W 2100 W 1500 W 900 W
Rated power (20 Hz–20,000 Hz; THD < 0.2%) 900 W 450 W 1200 W 600 W
Maximum bridged output (1,000 Hz; < 1% THD) 3200 W 2200 W 4200 W 3000 W
Frequency Response (-1dB, ref. 1kHz) 15 Hz – 40 kHz 15 Hz – 40 kHz
Signal-to-noise ratio, A-weighted 107 dB 108 dB
Total harmonic distortion <0.05% <0.05%
Intermodulation distortion (SMPTE) <0.02% <0.02%
Slew rate 35 V/µs 35 V/µs
Input impedance (balanced) 20 kΩ 20 kΩ
Crosstalk (at 1,000 Hz) <-80 dB <-80 dB
Dimensions (W x H x D) 19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm) 19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm)
Net weight 17.97 lb (8.15 kg) 19.18 lb (8.70 kg)
CPS 4.5 and CPS 4.10 rear view
CPS 8.5 rear view
CP3000S and
CP4000S rear view
CPS Contractor Precision Series Amplifiers
CP3000S
1600 W PER CHANNEL CLASSH POWER AMPLIFIER
• Advanced high-efficiency Class-H design
• Ideal for demanding concerts and tours
• Exceptional dynamic headroom
• Rugged, compact and lightweight
• 1600 W per channel (2 Ω)
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switch mode power supply
• Built-in dynamic limiters
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans
CP4000S
2100 W PER CHANNEL CLASSH POWER AMPLIFIER
• High power with advanced Class-H efficiency
• Ideal for demanding concerts and tours
• Exceptional dynamic headroom
• Rugged, compact and lightweight
• 2100 W per channel (2 Ω)
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switch mode power supply
• Built-in dynamic limiters
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans