Datasheet

12 13
CONCERT INSTALL PORTABLE PA
CONCERTINSTALLPORTABLE PA
LOUDSPEAKERS
LOUDSPEAKERS
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 60º to 120º
• 98 dB sensitivity, 131 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
EVF-1122S
12" TWOWAY FULLRANGE LOUDSPEAKERS
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 40º to 90º
• 101 dB sensitivity, 134 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
EVF-1152S
15" TWOWAY FULLRANGE LOUDSPEAKERS
EVF is the most comprehensive standard line of front-
loaded loudspeaker systems ever offered for installed
sound. Available in 12" or 15" two-way configurations
and enhanced with dedicated low-frequency systems, EVF
loudspeakers match exceptional audio performance,
efficiency, ease-of-use and aesthetics with unprecedented
value. EVF systems incorporate the latest Electro-Voice
components to ensure years of reliability and exceptional
sound. "S" designated systems are equipped with SMX
series symmetric drive woofers and ND2B 2" titanium
compression drivers; upgraded "D" high definition
systems are equipped with our highest performance DVX
series symmetric drive woofers and the DH7N 3" pure
titanium compression driver.
EVF two-way full-range systems are offered in seven
coverage patterns that provide solutions for the widest
possible range of installation challenges. The 12" Constant
Directivity waveguides can be rotated to work with a
vertical or horizontal orientation. Biamp operation is
supported, but the sophisticated fourth-order crossover
and protection network makes cost-saving, passive
operation extremely attractive. Using optional rigging
accessories, you can create attractive clusters that include
EVF full-range systems, as well as EVF subwoofers or EVH
full-range systems. Cabinets are available in three finishes:
EVCoat (interior use), PI (indirect weather exposure) or FG
(fiberglass—for direct weather exposure); they include
twenty-two M10 threaded suspension points.
EVF-1122S/64 EVF-1122S/66 EVF-1122S/94 EVF-1122S/96 EVF-1122S/99 EVF-1122S/126
Frequency Response (-3 dB) 58 Hz – 16 kHz
1,2
Frequency Range (-10 dB) 49 Hz – 19 kHz
1,2
Recommended High-Pass Frequency 65 Hz
Sensitivity (SPL, 1 W/1 m) 98 dB
Max. SPL @ 1 m (calc.) 131 dB
System Power Handling (Continuous
3
, Program, Peak) 500 W, 1000 W, 2000 W
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6 Ω
Input Connections Euroblock; PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H° x V° 60° x 40° 60° x 60° 90° x 40° 90° x 60° 90° x 90° 120° x 60°
LF Transducer 12" SMX2121 driver
HF Transducer 2" ND2B diaphragm compression driver
Internal Passive Crossover Frequency 1,450 Hz
Enclosure Material 13-ply weather-resistant birch
Grille
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension 22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D) 30.26" x 16" x 16.27" (768.6 x 406.3 x 413.3 mm)
Net Weight 63.1 lb (28.6 kg)
1
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
EVF-1152S/43 EVF-1152S/64 EVF-1152S/66 EVF-1152S/94 EVF-1152S/96 EVF-1152S/99
Frequency Response (-3 dB) 70 Hz – 14 kHz
1,2
Frequency Range (-10 dB) 41 Hz – 18 kHz
1,2
Recommended High-Pass Frequency 45 Hz
Sensitivity (SPL, 1 W/1 m) 101 dB
Max. SPL @ 1 m (calc.) 134 dB
System Power Handling (Continuous
3
, Program, Peak) 500 W, 1000 W, 2000 W
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6 Ω
Input Connections Euroblock; PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H° x V° 40° x 30° 60° x 40° 60° x 60° 90° x 40° 90° x 60° 90° x 90°
LF Transducer 15" SMX2151 driver
HF Transducer 2" ND2B diaphragm compression driver
Internal Passive Crossover Frequency 1,450 Hz
Enclosure Material 13-ply weather-resistant birch
Grille
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension 22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D) 30.26" x 18.5" x 18.37" (768.6 x 469.8 x 466.6 mm)
Net Weight 70.9 lb (32.1 kg)
1
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
EVF Front-Loaded Systems
See page 48–49 for EVF Rigging and Accessories.
EVF "S" STANDARD SERIES
EVF STANDARD 12" TWO-WAY SYSTEMS
EVF STANDARD 15" TWO-WAY SYSTEMS