Installation manual

Roof preparations
6 720 613 057 (2006/04)
21
Installing more than one row
When installing more than one row, the roof battens in
the first row must be laid just as if you were installing one
row (Fig. 14). The 5th and 6th batten for the lower row
are not needed.
B Attach second roof batten for the side clamp (Fig. 15,
Item 2).
B Attach third roof batten for the upper side clamp
(Fig. 15, Item 3).
B Attach fourth roof batten for supporting the polysty-
rene wedge of the upper facing panels (Fig. 15,
Item 4).
B Attach fifth roof batten for supporting the upper facing
panels (Fig. 15, Item 5).
B Attach sixth roof batten for supporting and fastening
the upper facing panels (Fig. 15, Item 6).
i
USER NOTE
The fourth additional roof batten (one-row
installation) is also the first roof batten of
the row above (Fig. 15, Item 1) and is re-
quired for anti-slip protection on the upper
collector array.
Fig. 15 Distances between additional roof battens when installing more than one row (measurements in mm,
values in brackets = landscape version)
63043975.19-1.SD
63043975.19-1.SD
280 - 310
1910 - 1940 (990 - 1020)
2210 (1290)
2310 - 2480 (1410 - 1440)
2550 - 2580 (1630 - 1660)
2
3
6
4
1
5