Operation Manual
Table Of Contents
- Table of Contents
- 1 Browser connection
- 2 System Overview
- 3 Operation via the browser
- 3.1 Livepage
- 3.2 Playback page
- 4 Settings Overview
- 5 Basic Mode
- 6 Advanced General Settings
- 7 Web Interface
- 8 Camera
- 9 Encoder Settings
- 10 Recording
- 11 Alarm
- 12 Setting up VCA
- 13 Network
- 13.1 Network Access
- 13.1.1 Automatic IP assignment
- 13.1.2 IP V4 address
- 13.1.3 IP V6 address
- 13.1.4 DNS server address 1
- 13.1.5 Video transmission
- 13.1.6 TCP rate control
- 13.1.7 HTTP browser port
- 13.1.8 HTTPS browser port
- 13.1.9 RCP+ port 1756
- 13.1.10 Telnet support
- 13.1.11 Interface mode ETH
- 13.1.12 Network MSS [Byte]
- 13.1.13 iSCSI MSS [Byte]
- 13.1.14 Network MTU [Byte]
- 13.1.15 Enable DynDNS
- 13.1.16 Provider
- 13.1.17 Host name
- 13.1.18 User name
- 13.1.19 Password
- 13.1.20 Force registration now
- 13.1.21 Status
- 13.2 Advanced
- 13.3 Multicast
- 13.4 Image Posting
- 13.5 Accounts
- 13.6 IP V4 filter
- 13.1 Network Access
- 14 Service
Camera Browser Interface Table of Contents | en 3
Bosch Security Systems Software manual AM18-Q0635 | v5.8 | 2013.05
Table of Contents
1 Browser connection 10
1.1 System requirements 10
1.2 Establishing the connection 11
1.2.1 Password protection in camera 11
1.3 Protected network 11
2System Overview 12
2.1 Livepage 12
2.2 Recordings 12
2.3 Settings 12
3 Operation via the browser 13
3.1 Livepage 13
3.1.1 Image selection 13
3.1.2 Status icons 14
3.1.3 Cameras with PTZ control 15
3.1.4 View Control ROI 16
3.1.5 Cameras with alarm and relay I/O 17
3.1.6 System Log / Event Log 18
3.1.7 Saving snapshots 18
3.1.8 Recording video sequences 18
3.1.9 Running recording program 19
3.1.10 Audio communication 19
3.1.11 Processor load 19
3.2 Playback page 20
3.2.1 Selecting recordings for playback 20
3.2.2 Exporting tracks 21
3.2.3 Searching for tracks 21
3.2.4 Controlling playback 22
4 Settings Overview 24
4.1 Configuration Menu 24
4.2 Settings 25