User manual

14 en | All functions at a glance Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
LED test on modules
Test LED displays of individual modules and simultaneously test all LED displays.
History log
See Maintenance – history log
Network
Information on availability of other nodes within the system network.
VAS
Information on all connected electro-acoustic systems that are used for voice evacuation
systems.
3.4 Maintenance
3.4.1 Walktest
Start / End walktest
Elements for the walktest are selected in this submenu. The following possibilities are offered
for selection:
– Select by number:
Display of a list of all elements:
Search for an element in a list by entering the number.
– Walktest group
– Loop
– Logical zone
– Elements
– Transmission device
– Control element
– More...
– DACT
– Key deposit
– Battery
– Mains power
When the walktest is complete, the following selection options are available:
– Add the tested elements to a different walktest group (Assign tested elements to
walktest group).
– Continue the walktest (No).
– Display tested or untested elements (Not tested, Tested).
Create / Change walktest group
– Deleting or adding individual elements to specified walktest groups.
– Delete all elements in a walktest group.
Maintenance -> Walktest Change language
Activate outputs Activate
transmission device
Remove detector History log
Change device
at V.24 interface
Bypass buzzer