User manual

Panel Controller Fault message | en 51
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
Example:
10.2.4 The newest message
The newest message is displayed at the end of the list.
10.2.5 Displaying individual elements of an element group
To display the individual elements in an element group, select the element group you require.
The fault messages of the individual elements are listed.
Fault Zone 00005
#001 Office 1 (6)
Element category: Different detectors in one logical zone
Message type: Fault
Address of element groups 00005: The fifth logical zone caused the first fault.
Number of individual
elements
(6): In the fifth logical zone (00005), six detectors caused a
fault. For element groups that only consist of one element, the
number of elements is not displayed.
Message number The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
001: The first and oldest fault message received.
Installation location of the
logical zone
Office 1
NOTICE!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
NOTICE!
15–30 seconds after the last entry (e.g. after scrolling through the list), the first and oldest
fault message is displayed at the beginning of the list again.