User manual

52 en | Fault message Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
10.2.6 Information about individual elements
The trouble message contains information about:
– Element category
– Message type
– Element address
– Message number
– Additional information (e.g. the installation location, depending on the configuration)
Example:
To display more information about an alarm message, see Section 10.2.7 Displaying additional
information, page 52.
10.2.7 Displaying additional information
To display further information about the individual elements, select the fault message you
require.
The following information is displayed:
– Element category
– Message type
– Date and time of the message
– Physical and logical addressing of the element
– Only for LSN detectors: specification of the detector type
– Action text (depending on the configuration)
Select OK to return to the list of all fault messages. Reset, see Section 10.3 Resetting
malfunction message, page 53.
Block, see Section 10.4 Isolating an element, page 53.
Fault Transmission device 00026- 004
#002 Cafeteria
Element category: Transmission device
Message type: Fault
Element address The following transmission device has caused a fault:
0005 - 004: The fourth transmission device (004) in the 26th
group (00026).
Message number The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
002: The second fault message to be received.
Installation location of the
element
Cafeteria
NOTICE!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
NOTICE!
The information displayed is entered in the FSP-5000-RPS programming software.