User manual

Panel Controller Diagnostics | en 61
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
13.4 Hardware
13.4.1 Address cards
To display information about the released addresses:
1. Select Diagnostics in the start menu.
2. Hardware
3. Address cards
The information is displayed.
A status bar appears.
4. Select the arrow keys to display further information.
5. Select Refresh to update data if necessary.
13.4.2 Display
Five different functions are offered:
– LED test: Test the LED display.
– Key test: Test the operativeness of the membrane keypad.
– Display test: Test the operativeness of the display.
– Display touch test: Test the operativeness of the touch-sensitive surface.
– Adjust touch screen (calibration): Adjust the location precision when touching the touch
screen.
LED test
To test the LEDs in the LED display:
1. Select Diagnostics in the start menu
2. Hardware
3. Display
4. Select LED test.
For the duration of approx. five seconds, all LEDs on the LED display light up.
Key test
To test the functionality of the membrane keypad:
1. Select Diagnostics in the start menu
2. Hardware
3. Display
4. Key test
5. Press one or more keys on the membrane keypad.
The selected keys on the membrane keypad are depicted on the touch screen.
If a key is pressed twice, this key is shown with a black background. Press the key again
to display it without distinction.
6. Select Stop key test to end the foil test.
Display test
To test the functionality of the display:
1. Select Diagnostics in the start menu
2. Hardware
3. Display
4. Select Display test.
Line by line, the display turns a dark color from the top to the bottom and then changes
again from black to white.