User manual

64 en | Diagnostics Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
The following interfaces are designated:
– CAN 1 interface
– CAN 2 interface
–Ethernet
– Serial Interface
– USB 1 interface
A node number from 1 to 32 can be assigned to panels. All numbers above 240 (241-255) are
assigned dynamically and used, for instance, for an OPC server or a PC with FSP-5000-RPS
software.
13.8 Electro-acoustic systems
To display a list of all connected electro-acoustic systems that are used for voice evacuation:
1. Select Diagnostics in the start menu
2. VAS
A list of the available electro-acoustic systems is displayed.
To display information on an available electro-acoustic system:
1. Touch one of the systems displayed in order to select it. The following information is
displayed:
– Trouble (yes/no)
– Emergency (yes/no)
– Failure (yes/no)
– Internal supervision (yes/no)
– Supervision time (sec).
– Boot up phase is finished (yes/no)
– Failure at Controller (yes/no)
– Failure at Router (yes/no)
LEDs
CAN 1
1.2
1.1
1.3
CAN 2
CAN 1 CAN 2
CAN 1
CAN 2
1.4
CAN 1
CAN 2