User manual

66 en | Maintenance Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
14.3 Activate Outputs
1. Select Maintenance from the start menu
2. Activate outputs
Various element categories are displayed.
3. Select a category or Select by number and enter the number of the element into the
search screen; see also Section 5.7 Search Function/Element, page 30
4. Select the required list fields. The list fields are marked.
5. Select On to activate the selected signaling devices.
The selected signaling devices are activated.
6. Select All to activate all signaling devices.
7. To end activation of the selected elements, repeat the same steps but select Off in
step 5.
14.4 Activate Transmission Device
To activate a transmission device:
1. Select Maintenance from the start menu
2. Activate transmission device
A list of the elements is displayed. Refer to Section 5.6 Working with lists, page 27 for
information on how to navigate through a list.
3. Select the required list fields.
The list fields are marked.
4. Select On.
The selected transmission devices are activated:
To end activation of the selected elements:
1. Select Maintenance from the start menu
2. Activate transmission device
3. Select the list fields of the activated transmission devices.
4. Select Off.
The transmission devices are no longer activated.
NOTICE!
In the HVAC element category, the Auto function field is also offered. Select this function field
to assign automatic mode to a fan, for instance.