User manual

Panel Controller Maintenance – history log | en 73
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
16 Maintenance – history log
In the history log, all data about particular events or device types is stored sorted by date and
time. To display only particular data, filters can be set.
In addition to a menu overview, this chapter contains information about the following points:
– Section 16.1 Selecting filters, page 73
– Section 16.2 Setting filters, page 73
– Section 16.3 Change Filter, page 74
– Section 16.4 Combining several filters, page 74
– Section 16.5 Status bar functions, page 74
– Section 16.6 Printing out data, page 75
16.1 Selecting filters
The following filters are available:
If one or more filters have been set, the Change filter field in the status bar is highlighted in a
dark color.
16.2 Setting filters
To display only particular data, a filter can be set.
Example:
To display only data that was stored in connection with a particular event, such as Fault:
1. Select Maintenance from the start menu
2. History log
3. Select the Event types filter.
A list of all event types is displayed.
4. Select a list field, for instance Fault.
In the status bar, the Change filter field has a black background. See also
Section 16.3 Change Filter, page 74.
5. Select Show in history log.
A list of all fault messages is displayed. The events are sorted in ascending order by date
and time.
The fault messages are numbered chronologically.
The leading number indicates the sequence in which the fault messages were received.
Filter Data, filtered by...
Without filter All data
Show all
Delete filter
Display all data with specification of event number, date, time,
element number and message type. Existing filters are
deleted.
Period Starting date, end date and time
Event types Message types, such as Fault
Device types Device types, such as Detectors
Address range Address range within a system
User commands Selected function fields such as Acknowledge or Reset.
Walktest Elements switched to walktest mode