User manual

Panel Controller Maintenance – history log | en 75
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
16.6 Printing out data
Either the complete list or a specific part of it can be printed out.
To print out data that is displayed on a list:
1. Select Print on the status bar.
Two possibilities are offered:
– Entire list: the complete list is selected.
To print the list, continue with step 6.
– Define range: an exact range is defined within the list.
The following two possibilities are available to specify the area of the list to be printed
out:
– Limit the number of events, counted from the newest event.
– Specifying a particular area via the entry of the event numbers.
2. Select Define range.
Two possibilities are offered on the display.
3. Activate the checkbox in front of one of the two options:
– Number of events to be printed starting from latest event:
For the printout, enter a particular number of events, counted from the most recent
event.
– Event numbers to be printed:
To print out a particular range, specify by entering event numbers.
A checkmark is placed in the selection field.
4. Enter the numbers you require.
To enter a number, see Section 5.8 Entering numbers and text, page 31.
5. Select OK to confirm the entry.
A list of the printers that can be selected is displayed.
6. Select a printer.
7. Select Print.
The list is printed.
Event numbers
To display the event numbers again:
1. Select Show event numbers.
2. To exit the display, press the "Back" key.