User manual

8 en | For your information Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
1 For your information
This operation guide contains important information and notes on operating the FPA-5000
and FPA-1200 fire panels.
Using the step-by-step directions, you can familiarize yourself with the individual functions:
– Section 4 In overview, page 19 provides an overview of the operating and display elements
and the touch screen.
–In Section 5 Operating principle, page 25, you will learn how to navigate through the
individual menus and which selection possibilities are available to you.
Each function is described in detail in an individual chapter.
You will find specific topics in the table of contents. If you are already practiced in the
handling of menus, you can use the overview of all menus in Section 3 All functions at a glance,
page 12.
1.1 Depiction of steps
The sequence of steps that you need to execute a function is depicted as follows:
1. In the start menu, select Bypass Block.
2. Bypass
In more detailed form:
1. Call up the start menu.
2. Select Bypass/Isolate.
3. Select Bypass.
1.2 Calling up the start menu
1. Press the "home" key.
You can use this key to return from any submenu back to the start menu.
NOTICE!
In standby mode, the standby screen is displayed. This contains different information
depending on the configuration.
To call up the start menu or change the language display, see Section 5 Operating principle,
page 25.
NOTICE!
The display changes from each menu element to the standby display if no entries are made
within one minute.