User manual

84 en | Configuration Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
18.5.3 Set Default Password
1. Select Configuration in the start menu
2. Operator
3. Set default password
A list of all operators is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28
for information on how to scroll forward and backward through a list.
4. Select the list field you require.
The list field is marked.
5. Select Reset.
The operator’s password is reset to his/her previous password.
18.6 Rename elements
To change the name an element:
1. Select Configuration in the start menu
2. Rename elements
A list of all elements is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28 for
information on how to scroll forward and backward through a list.
3. Select the list field you require.
An entry screen is displayed.
4. Enter a new name. Refer to Section 5.8 Entering numbers and text, page 31 for information
on how to enter text.
5. Select OK to confirm the entry or Cancel to cancel the operation.
The event with the new name is displayed on the list.
18.7 Overview
To display important information on the valid configuration of the system:
1. Select Configuration in the start menu
2. Overview
The following information is displayed:
– Configuration and additional information on this
– Date
– Configuration version (Config. version)
–Number
–Name
–IP address
–Scope
–Country
–Time zone
–Menu name