User manual

90 en | Search Function/Element Panel Controller
F.01U.076.969 | 6.0 | 2010.04 Operation guide Bosch Sicherheitssysteme GmbH
21 Search Function/Element
This chapter contains information about the following points:
– Section 21.2 Searching for function and device description, page 90
– Section 21.3 Search element, page 90
21.1 Menu overview
21.2 Searching for function and device description
To search for a function or a device:
1. Select Search function / element in the start menu
2. Search function
A list of all functions and device descriptions is displayed.
Refer to Section 5.6.1 Scrolling through lists, page 28 for information on how to navigate
through a list.
3. Select the list field you require.
The submenu of the selected function or device description is displayed.
21.3 Search element
To search for an element which is connected to the system:
1. Select Search function / element in the start menu
2. Go to element
Three different lists are offered. See also Section 5.6 Working with lists, page 27.
3. Select a list, e.g. By description.
A list of the detectors is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28
for information on how to navigate through a list.
4. Select the list field you require.
Different selection fields may be offered for the selected element (e.g. OK, Bypass).
What is displayed depends on:
– the message types (e.g. fault, alarm etc.) that can be assigned to this element.
– the mode (e.g. bypassed, reset etc.) that the selected element is in.
Search
function / element
-> Search function
Go to element