Installation guide

Initial Start-Up
As soon as the fire panel is connected to the power for the first
time, an LED and buzzer test begins. This is completed the first
time a key is pressed.
In the initial start-up, you must make the following basic
settings:
– Set the language
– Set the time and date
Setting the Language
To set the language, proceed as follows:
i
Use the arrow keys to set the desired language.
ACK
Confirm your selection in the menu with the ACK
key.
Setting the Time and Date
Set the current time and date. The current time and date are
important for functions such as
– Event memory and
– Automatic switching to night mode.
i
Use the arrow keys to set the current day.
ACK
Confirm your selection in the menu with the ACK
key.
Repeat this procedure to set the correct values for the month,
year and time.
3.4
3.4.1
3.4.2
Conventional Fire Panel Installation | en 29
Bosch Sicherheitssysteme GmbH 2014.06 | 7.0 | F.01U.172.980