Installation guide

1
Press zone key 1. This takes you to the System
Config menu.
6
Press zone key 6.
This takes you to the Faults submenu.
2
1
...
Press zone key 1 or 2.
– 1=Latching (default setting)
– 2 Non Latching
Level Code
In the Level Code menu, you can specify new codes for
operating levels 2 and 3. The new code must be 4 characters
long and is displayed during entry.
Notice!
The following codes are programmed in delivery status:
Operating level 2: 1234
Operating level 3: 3333
1
Press zone key 1. This takes you to the System
Config menu.
7
Press zone key 7.
This takes you to the Code submenu.
2
1
...
– 1- Level 2 Code
– 2- Level 3 Code
1 2 3 4 5 6 7 8
Level 2 Code
Set to: ____
You are prompted to enter the new code.
4.1.7
38 en | System Configuration Conventional Fire Panel
2014.06 | 7.0 | F.01U.172.980 Bosch Sicherheitssysteme GmbH