Installation guide

Notification appliance 1 zone assignment
5
Press zone key 5.
This takes you to the Output Config menu.
1
Press zone key 1.
This takes you to the NAC submenu.
1
Press zone key 1.
This takes you to the NAC Zones submenu.
8
1
...
Use the zone keys to select the corresponding zones
whose alarm you want to activate notification
appliance 1.
You can select multiple zones. If you press the zone
key again, the selection is cancelled.
ACK
Confirm your selection.
Notification appliance 2 zone assignment
See "Notification appliance 1 zone assignment", Notification
appliance 1 zone assignment, page 50.
Reactivating notification appliances
5
Press zone key 5.
This takes you to the Output Config menu.
1
Press zone key 1.
This takes you to the NAC submenu.
3
Press zone key 3.
This takes you to the Reactive NAC submenu.
2
1
...
Press zone keys 1 or 2.
1=By Other Zone (default setting)
2 No Reactivate
50 en | System Configuration Conventional Fire Panel
2014.06 | 7.0 | F.01U.172.980 Bosch Sicherheitssysteme GmbH