Installation guide

Controlling Outputs
In the Output Control menu you can activate and deactivate the
individual outputs for test purposes. When you exit operating
level 3, all activations of the outputs are reset to the normal
state again.
Notification appliance 1
7
Press zone key 7.
This takes you to the Output Control menu.
1
Press zone key 1.
This takes you to the NAC 1 submenu.
ACK
RESET
– Press the ACK key.
Notification appliance 1 is activated.
– Press the RESET key.
Notification appliance 1 is deactivated.
Notification appliance 2
7
Press zone key 7.
This takes you to the Output Control menu.
2
Press zone key 2.
This takes you to the NAC 2 submenu.
ACK
RESET
– Press the ACK key.
Notification appliance 2 is activated.
– Press the RESET key.
Notification appliance 2 is deactivated.
4.7
4.7.1
4.7.2
54 en | System Configuration Conventional Fire Panel
2014.06 | 7.0 | F.01U.172.980 Bosch Sicherheitssysteme GmbH